Netgear ProSAFE Business Class 802.11n Wireless Access Point
Business Class 802.11n (300 Mbps)Standalone configuration for easy set upPower over Ethernet for flexible deploymentMultiple SSID for enhanced securityFeatures:The NETGEAR ProSAFE WN203 Wireless-N Access Point provides standalone configuration for easy setup for a reliable, high-performance and affordable 802.11n wireless solution for small or medium businesses. Power over Ethernet enables flexible deployment and multiple SSID provide enhanced security.Comprehensive security with support of wireless security (WPA, WPA2) and rogue AP detectionEnterprise-grade wireless security with 802.1x and Radius serversMultiple SSIDs with captive guest portal with VLAN segmentation for added securityDeploy over large areas with WDS point-to-point and point-to-multipoint bridgingQuality of service (QoS) with WMM and save battery power for clients with WMM Power SaveEasy of deployment with standard 802.3af Power over Ethernet (PoE) to eliminate external power adaptersWall or desk mounting for flexible deploymentConnectors for external antennas for added coverage rangeSpecificationsBand Single 802.11nDevice type Wireless Access PointPorts 1 x 10/100/1000BASET Ethernet RJ45 with Auto Uplink (Auto MDI-X) with IEEE 802.3af, Power over Ethernet (PoE) Support, 2 x Reverse SMA Antenna Connectors, LEDs: Power, Test, LAN, Wireless, Default ResetSecurity Wired Equivalent Privacy (WEP) Encryption;WiFi Protected Access Pre-shared Key (WPA-PSK, WPA2-PSK);Rogue AP detection;IEEE 802.1x Authentication;MAC Address filtering;8 BSSID;IEEE 802.1x Radius (EAP TLS, TTLS, PEAP);Wireless access control to identify authorized wireless devicesSpeed Warranty Access Point: NETGEAR Lifetime Warranty;Power supply: NETGEAR 3-year WarrantyWireless IEEE 802.11 b/g/n 300 Mbps? Wireless Access Point;Antenna: 3 dBi (internal) with additional (2) 2.4 GHz detachable antenna connectors; WDS Point-to-point wireless bridge modeWDS Point-to-multipoint wireless bridge mode;WDS Repeater mode;Adjustable Transmit Power Control (TPC)Specifications Physical CharacteristicsPowerCountry-specific plug: 12 watt, 12V,1 Amp power adapterPower over EthernetPower consumption: 4.0WPhysical DimensionsDimensions (L x W x H): 173 x 133 x 35 mm (6.8 x 5.3 x 1.4 in)WeightWeight: 240 g (0.5 lb)MountingDesktop, wall, and ceilingInterfaces and IndicatorsPhysical InterfacesOne (1) 10/100/1000BASE-T Ethernet (RJ-45) port with Auto Uplink(Auto MDI-X) with IEEE 802.3afPower over Ethernet (PoE) supportTwo (2) reverse SMA antenna connectorsLEDsPower, test, LAN, wirelessDefault ResetEnvironmental ConditionsOperating TemperatureMinimum (C/F) 0/32Maximum (C/F) 45/113Storage TemperatureMinimum (C/F) -20/-4Maximum (C/F) 70/158Operating Relative HumidityMinimum 10%Maximum 90%Storage HumidityMinimum 5%Maximum 95%MTBF@ 25 degrees C > 375,000 hours@ 50 degrees C >125,000 hoursMTBF@ 25 degrees C > 375,000 hours@ 50 degrees C >125,000 hoursRF CharacteristicsStandardsIEEE? 802.11n 2.0 specificationIEEE 802.11gIEEE 802.11bFrequency Band2.4 G Hz802.11n Transmit x Receive2x2Maximum Theoretical Throughput300 MbpsMaximum Transmit Power22 dBm @ 802.11b (1 Mbps)21 dBm @ 802.11g (6 Mbps)21 dBm @ 802.11n (MCS0)Network ManagementDeployment optionsStandaloneWeb UISSLSNMPSNMP v1, v2 with 802.11 standard and proprietary MIBsRemote configuration and management through Web browser, or SNMPFeaturesWirelessIEEE 802.11 b/g/n 300 Mbp? Wireless Access PointAntenna: 3 dBi (internal) with additional (2) 2.4 GHz detachable antenna connectorsAdvanced WirelessWDS Point-to-point wireless bridge modeWDS Point-to-multipoint wireless bridge modeWDS Repeater modeAdjustable Transmit Power Control (TPC)SecurityWired Equivalent Privacy (WEP) EncryptionWiFi Protected Access Pre-shared Key (WPA-PSK, WPA2-PSK)Rogue AP detectionIEEE 802.1x AuthenticationMAC Address filtering8 BSSIDIEEE 802.1x Radius (EAP TLS, TTLS, PEAP)Wireless access control to identify authorized wireless.